How To Use Afterflame Paste

Upon opening jar, stir throughly and add a few drops of distilled water if needed.

once you have a thin coat applied you can shoot flames as soon as product dries or leave product dried on exhaust for around 48 hours for future use.

Apply a thin layer of paste to exhaust tips cold or hot works, spread paste around the whole exhaust tip in a thin even layer.

Keep jar sealed tight when not in use!
wear PPE, gloves etc. (recommended)
wash hands thoroughly after handling as Product is toxic!

Apply a thin layer of paste to exhaust tips cold or hot works, spread paste around the whole exhaust tip in a thin even layer.

once you have a thin coat applied you can shoot flames as soon as product dries or leave product dried on exhaust for around 48 hours for future use.

Apply a thin layer of paste to exhaust tips cold or hot works, spread paste around the whole exhaust tip in a thin even layer.

You can start with less paste and add more deeper in the exhaust if color isn't present after shooting flames
You want the paste to be a thin batter consistency, be careful not to add too much water.

Spread the paste! preferably on a hot exhaust for immediate drying/use.

once you have a thin coat applied you can shoot flames as soon as product dries or leave product dried on exhaust for around 48 hours for future use.

once you have a thin coat applied you can shoot flames as soon as product dries or leave product dried on exhaust for around 48 hours for future use.

Remember a thin, even coat around the exhaust ranging anywhere from 2 inches through 6 inches deep into the exhaust
wash your hands after handling!
If product makes contact with skin wash immediately!

once you have a thin coat applied you can shoot flames as soon as product dries or leave product dried on exhaust for around 48 hours for future use.

once you have a thin coat applied you can shoot flames as soon as product dries or leave product dried on exhaust for around 48 hours for future use.

once you have a thin coat applied you can shoot flames as soon as product dries or leave product dried on exhaust for around 48 hours for future use.

The product works best when applied and used within 48 hours of being on the exhaust. Although the product can last and work past that time.
Enjoy your colorful flames and send the results to us!
ONLY ADD COLOR SALT IN EXHAUST WITH PASTE DO NOT MIX IN JAR!

Green flames!

Easy removal. Soak a paper towel or rag in water and wipe/wash away.

Read all the instructions/ warnings to avoid any harm or damage.

Send your results to after.flame on Instagram for a chance to be featured on the social/website or to be contacted for potential deals

Read all the instructions/ warnings to avoid any harm or damage.

Easy removal. Soak a paper towel or rag in water and wipe/wash away.

Read all the instructions/ warnings to avoid any harm or damage.

There will be additional instructions and safety warnings in the box, on the jar and of course here on the website.
hope you enjoy!

Easy removal. Soak a paper towel or rag in water and wipe/wash away.

Easy removal. Soak a paper towel or rag in water and wipe/wash away.

Easy removal. Soak a paper towel or rag in water and wipe/wash away.

Product may be dusty if not using a wet rag or paper towel
Avoid breathing in any dust when cleaning exhaust!
wash hands after cleaning and application of paste!

Now your exhaust is clean.

Easy removal. Soak a paper towel or rag in water and wipe/wash away.

Easy removal. Soak a paper towel or rag in water and wipe/wash away.

You're all done!
Shiny clean exhaust ready for another coat of Afterflame paste anytime!